An ISO 9001 : 2008 Certified Company

Saru Aikoh Chemicals Limited


Home  |  Profile  |  Products  |  Contact Us  |  Enquiry

Product Range

Non Ferrous


Cover Fluxes


Saru Grain Refiners



Titanium Boron Master Alloy

Strontium Master Alloy

Saru Coats

Saru Aikoh Diecoat

Zinc & Zinc Alloy

Copper & Copper Alloy, Lead Based Alloys


company video
Home  »  Products  »  Aluminium

Cover Fluxes

These fluxes are formulated for preventing formation & removal of oxides and other inclusion. It also prevents molten Aluminium from turning into dross.

A-IF Covering and drossing flux for Aluminium Alloy for melting in Crucible/Electric Furnace. 0.5 -1.0%
A-1 Less exothermic than A-1F for reverberatory furnace 0.5 -1.0%
A-4 For melting of turning and borings. It prevents oxidation and gas absorption during melting. 5 - 10% or as per practice
A-5 For covering specially for reverberatory furnace. 05. - 1.0%
A-6 Covering flux for Al.Mg, Alloy for reverberatory furnace. 2 - 3%
A-8 Furnace cleaning flux, removes oxide build up from furnace wall used once per week, sprayed on the dross depending upon oxide build up
A-224(50) Drossing flux for A1-Mg Alloy 0.25%
A-56 Exothermic Cover Flux For Bogie treatment for general melting for higher recovery of A1-metal from dross. 5 - 10%
A-224(1) Injection flux to be used by FLUX FEEDER MACHINE for better drossing and removal of oxides & other inclusions right from bottom of the furnace.


D-6 A low fume, slow bubble degassing agent, specially for reverberatory furnaces. 0.15 - 0.20%
D-20/D-40 Exceptionally strong Degasser for a very wide range of products. 0.15 - 0.25%
D-54 For Na and Ca removal 0.20 - 0.60%
D-19/D-41 General purpose Degassing-cum-Grain refining agent for all Alloy. 0.15 - 0.25%

Saru Grain Refiners

A-2 Titanium-Boron base Grain Refiner for Hypo-eutectic Alloy. 0.1 - 0.2%
A-2B Only Boron based Grain Refiner for Hypo-eutectic Alloy. 0.1 - 0.2%
A-113(P) Phosphorus base Grain refiner for Hyper Eutectic Alloy. 0.2 - 0.4%
A-4H Diluted version of A-2 0.1 - 0.2%


A-129     Modifier for A1 - Si eutectic Alloy containing Silicon in the range of 10 to 13% for high Operating Temperature (790° - 800° C) 1.5%
A-136 Modifier for A1- Si eutectic Alloy containing Silicon in the range of 10 to 13% for lower Operating Temperate (740° - 750° C) Upto 1.5%
A-58 Modifier for operating temperature at or less than 750° C Upto 1.5%


Atabletted product for the removal of small quantities (less than 1%) of unwanted Magnesium from Aluminium melt.
Rate of Addition : 1% of charge weight for every 0.1% Magnesium to be removed.

Products Range

Aluminium  |  Zinc & Zinc Alloy  |  Copper & Copper Alloy, Lead Based Alloys  |  Teeming Compounds

Home  |  Profile  |  Products  |  Sitemap  |  Company Video  |   Contact Us  |  Enquiry

Member © Saru Aikoh Chemicals Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited